GST102A Conventional Fire Alarm Control Panel

GST102A Conventional Fire Alarm Control Panel is designed in compliance with EN 54-2 1997 + A1: 2006 & EN 54-4 1997+A1: 2002+A2:2006 standard. It’s compatible with GST conventional detectors, manual call points and sounders. The panel is easy to install and operate. Control functions are enabled by a key switch. Programming functions are enabled by a key switch and an internal switch.

Features:

2 zones.Each zone can have maximum 32 conventionaldetectors. The total number of detectors and call points in a zoneshall not exceed 32
Each zone can be programed work as fire alarm (default) orsupervisory alarm mode
Each zone include 2 indicators, 1st indicator is bi-color( Red andGreen), factory default to indicate fire condition. Red color on in casefire signal triggered; also can be programed to indicate supervisorycondition. Green color on in case superisory signal triggered. 2ndabmer indicator flashes when the zone is in fault condition(0.5:0.5).And it illuminates steadily when the zone is disabled or in test mode.
1x Alarm output can be setup as 24V or N/O,N/C 3x sounder outputs, output 1 can be setup 24V or N/O N/C, output 2 and 3 only work as 24V output
1x Disable/supervisory relay ouput (N/O COM N/C)
1 x Fault output (N/O COM N/C)

1x Auxilary power output: output current 450mA in standby mode and Maximum 1000mA in alarm mode when the Alarm Output been set to a normally open/close contact type
Able to report short circuit and open circuit of detection zones, sounder outputs and alarm output
Designed with standby batteries and space provision fortwo sealed lead-acid batteries
Easy operation to enable/disable zones, sounder outputsand alarm output
Alarm Test function selectable with or without soundernotification
Output programmable for interlink between zones andsounder outputs, alert or evacuate tone, with or without delay
Different Silence/Reset/Test modes can be selected tomeet local requirement
Remote controls available for silence evac and reset
Three access levels settable via key control
Reserved repeater panel interface for fire alarm indicationof multiple zone

GST102A Conventional Fire Alarm Control Panel

Features:

Company

Products